KEG SYSTEM EQUIPMENT

SPECIAL ORDER ONLY, 2-3 WEEKS 3" Column Draft Beer Tower - Polished Stainless Steel - 2 Faucet Draft Beer Tower Features: NSF Approval Polished stainless steel will not pit or chip like chrome. Specifications: Dispense System Air Cooled Faucets 2 ( Tap Handles not included ) Finish Polished stainless steel Connection (Product) 5' x 3/16" I.D. hoses with 3/16" tailpiece and hex nut connections Height 12" Column Diameter 3" Faucet Height 9-1/4" Beer Tower Comes Complete With: Preassembled 5' long brewery approved beer hoses, that are unaffected by normal cleaning chemicals, with a hex nut and neoprene washer on one end for connecting to keg coupler. Two premium quality chrome plated solid brass beer faucets with a chrome plated forged brass body, a Teflon lever washer for smooth consistent performance and easy operation, a solid brass faucet lever, and a chrome plated bonnet, shaft, and collar. (Tap Handles not included) Mounting gasket and mounting hardware.

Features: Use in tight clearance situations where there is a possibility of the beer hose being kinked. Fits on any coupler. Adds only 3/4" to over all length of coupler Specifications: Type 90° Elbow Material Brass, chrome plated Thread 7/8"-14 (5/8" BSP) Note: Must be used with neoprene washers for a leak free connection.

Specifications: Type Lager & Ale Faucet Body Chrome plated forged brass Body Threads 1-1/8"-18 Thread (U.S. Beer Industry Standard) Lever Material Brass Lever Threads 3/8"-16 UNC (Unified Coarse Thread) Shaft Chrome plated brass Bonnet & Collar Chrome plated brass

SPECIAL ORDER ONLY 2-3 WEEKS Draft Beer Stout & Ale Faucet - Polished Stainless Steel Body Features: The best in purity - all stainless steel & plastic contact with the beer. Pull forward to pour, push back for a creamy finish. Remove the restrictor disc to pour lagers or ales. Note: Faucet extends 1" further out from tower than standard beer faucet Specifications: Type Stout & Ale Faucet Lever Threads 3/8"-16 UNC (Unified Coarse Thread) Body Polished Stainless Steel Body Threads 1-1/8"-18 Thread (U.S. Beer Industry Standard) Nozzle Plastic (Black)

SPECIAL ORDER ONLY, 2-3 WEEKS Features: No limit to number of shut offs. No sealant or tape required. No need to remove the safety assembly. Specifications: Type Gas Distributor Performance 1 Pressure / 3 Keg Minifold Material ABS Mounting Bracket Integrated Inlet Connection 3/8" (To fit 5/16" I.D. Gas Hose) Outlet Connections 3/8" (To fit 5/16" I.D. Gas Hose)

Double Gauge - CO2 Primary - Economy Series Features: Forged brass and die cast for durability. Quad-Ring inlet seal at tank connection. Set screw pressure adjustment. Flow control inlet nipple filter. Specifications: Type Primary Regulator - CO2 Installation CO2 tank mount (CGA-320 threads) Performance 1 Pressure / 1 Keg Output Pressure Gauge 0-60 PSI, for accurate keg pressure Tank Pressure Gauge 0-3000 PSI, for remaining tank pressure Capacity SCFM 3.5 Max Outlet Barb 3/8" O.D. (To fit 5/16" I.D. Gas Hose) Integral PRV For safety: pressure relief valve releases at 55-65 PSI

D System - Keg Coupler - Tap w/ Yellow Lever Handle "D" system is the most common system available in the US, also known as American Sankey. It is used by all the major breweries - Anheuser-Busch, Miller, Molson-Coors, and Labatt as well as most craft breweries. The keg coupler connects to the keg valve, "tapping" the keg. Both the gas line from the CO2 tank / regulator and the beer hose to the beer faucet attach to the coupler. Beer Keg Coupler Features: Stainless Steel body improves durability and resistance to chemicals Stainless Steel handle fork for added strength Tin-nickel plated probe is resistant chemicals and won’t chip like chrome Short handle is ideal for the smaller diameter 1/6 kegs Specifications: System "D" (American Sankey) Body Material 303 Stainless Steel Probe Material Tin-Nickel Alloy Plated Handle Color Yellow Handle Style Lever Gas Port 3/8" O.D. Barb (To fit 5/16" I.D. Gas Hose) Beer Port 7/8"-14 Thread (U.S. Beer Industry Standard) Height 3-13/16"

M System - Keg Coupler - Tap w/ Ergo Lever Handle "M" System Recently introduced to the U.S. market. Body is the same as the German Slider, but the probe configuration is unique. It is used by breweries such as Schneider, Aventinus, and Einbecker. The "M" system should not be confused with the "A" system German slider that is used by the majority of German breweries. The keg coupler connects to the keg valve, "tapping" the keg. Both the gas line from the CO2 tank / regulator and the beer hose to the beer faucet attach to the coupler. Beer Keg Tap Features: Slide on keg connection Stainless steel probe Easy to engage handle: push down to tap/pull up to untap Specifications: System M Products Schneider / Aventinus / Einbecker Handle Color Black Handle Style Ergonomic Lever Gas Port 3/8" O.D. Barb (To fit 5/16" I.D. Gas Hose) Beer Port 7/8"-14 Thread (U.S. Beer Industry Standard) Height 5-3/16" Probe Seal Material EPDM

U System - Keg Coupler - Tap w/ Ergo Lever Handle "U" system takes its name from the English manufacturer UEC. It is used by breweries Guinness and Harp. Visit our beer system listing for an expanded listing of beers that use the "U" system valve. The keg coupler connects to the keg valve, "tapping" the keg. Both the gas line from the CO2 tank / regulator and the beer hose to the beer faucet attach to the coupler. Beer Keg Tap Features: Well-type connection Stainless steel probe Short handle is ideal for the smaller diameter 1/6 kegs Easy to engage: push down to tap/pull up to untap Specifications: System U Products Guinness / Harp Handle Color Black Handle Style Ergonomic Lever Handle Gas Port 3/8" O.D. Barb (To fit 5/16" I.D. Gas Hose) Beer Port 7/8"-14 Thread (U.S. Beer Industry Standard) Height 4-13/16"

Specifications: Capacity 1 Quart Dimensions 3-3/4" Diameter x 8" Height

Heavy Duty Draft Beer Faucet Wrench Specifications: Type Faucet Wrench Fits Standard Faucet Coupling Nut

Self-Closing Faucet - Chrome Plated - Brass Lever 4933KSC Spring back design closes the faucet upon handle release. Specifications: Type Lager & Ale Faucet Body Chrome plated forged brass Body Threads 1-1/8"-18 Thread (U.S. Beer Industry Standard) Lever Material Brass Lever Threads 3/8"-16 UNC (Unified Coarse Thread) Action Self Closing, spring loaded shaft Shaft ABS Plastic Bonnet & Collar Chrome plated brass

SPECIAL ORDER 2-3 WEEKS A spout plug is an economical solution for controlling fruit flies, yeast and bacteria buildup when the faucet is not in use. Specifications: Length 1-3/8" Inside Diameter 5/8" Color Black Application Fits Standard Beer and Wine Faucets